Skip to main content

Hardwood Floor Refinishing in Nashville, TN

Old repairs, worn finish, and boards that move with the seasons can all show up in the same Nashville home. We’ll look at what changed, how much wood is available to sand, and how a test patch reads beside the floor you plan to keep.

Refinished hickory flooring with natural color variation in a Franklin game room

Refinished hickory from McGrath’s Hartog project in Franklin, TN.

Inspect old repairs
Check for active moisture
Test color on existing wood

What changed since the floor was installed?

Start with what you can see today, then tell us what changed. A former doorway, a leak, or a finish applied in one room can help explain why two areas now look or behave differently.

Look closely at the patch

Compare the old and replacement boards for species, width, grain, and height. New wood can take color differently from aged wood. Ask to see a sample that crosses the repair before choosing the stain for the room.

Find out whether the wood is still moving

Tell us when the edges lifted or the gaps appeared, especially if they change with the season. Check for moisture sources and have the wood assessed before setting a sanding date. If an old leak or crawlspace issue is part of the story, mention it when you schedule the visit.

Compare both sides of the doorway

Sunlight and previous refinishing can make adjacent boards look different even when the species is the same. Compare sheen and color under the room’s usual light. If you plan to keep one room’s finish, agree on a stopping point and check what the join will look like.

Rick Says technical note

Check what’s moving before you sand. If the board edges are lifting, ask what’s making them move. If moisture is the cause, find out how your installer will tell when the wood has stabilized. Then you can talk about sanding and stain.

A Nashville homeowner’s moisture investigation

Nashville customer Michael Westra reported that when his hardwood began to warp, Rick inspected the crawlspace, traced the problem to the home’s humidity system, and sent photos and notes for the HVAC technician.

McGrath’s finished hickory floor by the fireplace during the Franklin Hartog project walkthrough

Hartog project walkthrough in Franklin, TN.

Look at the finished floor from the doorway

On the Hartog project in Franklin, McGrath replaced selected kitchen boards and refinished the hickory through several rooms. The walkthrough shows the finished floor in daylight, with the variation in the existing wood still visible.

Ask for that same perspective during your own test patch. Look at the repair from the doorway as well as up close.

What we’ll look at before quoting

Walk the floor’s history

Show where the wear starts, which areas have been patched, and what you know about leaks or earlier refinishing.

Check moisture and remaining wood

Look for signs of movement. Check the sandable wood where it can be inspected, especially on a previously refinished or engineered floor.

Review the sample in the room

Compare the chosen stain and topcoat in daylight and under your usual lights, including at any old repair or adjoining finish.

Write down the scope

Confirm the boards to repair, the boundaries of the work, and when each area can return to use under the chosen finish system.

Questions about refinishing in Nashville

Will refinishing make an old patch disappear?

That depends on the species, grain, age of the wood, and how the patch is laid out. A close blend may be possible. A sample that includes both old and new boards will give you a better idea before the full floor is sanded.

Can a maintenance coat change the stain color?

A maintenance coat refreshes a compatible finish. To change the stain color, a flooring professional generally needs to sand to bare wood after confirming the floor can take another sanding.

Can you sand wood that has cupped?

Have the moisture source identified and addressed, then have the floor checked for stability. Ask the crew to explain whether the boards can recover, whether there is enough wood left to sand, and whether any boards need repair.

What should I bring to the first appointment?

Bring a wide photo, a close-up of the worn or repaired boards, and any label, spare board, or finish record you still have. Tell us if the floor changes with the season or if there was a previous leak.

Show us the spot you’re concerned about

For a Nashville assessment, show us the area you want to refinish and the adjoining floor you want to keep. Tell us whether the boards move seasonally and point out any old repairs. We’ll start there.

Flooring and cabinetry samples at McGrath Floor & Design’s Franklin showroom