Skip to main content

Solid and Engineered Hardwood Installation in Franklin, TN

When you open up a Franklin home with an addition or remodel, the rooms you want to connect can have different floors underneath. McGrath helps you choose solid or engineered hardwood by checking the subfloor, floor heights, and the wood you plan to keep.

Warm hickory floor around a gray kitchen island and window-side dining area

Refinished hickory at the Hartog home in Franklin. The original wood was suitable to keep.

Choose wood for what’s underneath
Compare finished heights before ordering
Decide how much wood you want to keep

Choose the hardwood your subfloor can support

Start with a floor plan marking the original rooms, any addition, and the doors and trim you want to keep. The build-up from the subfloor to the top of the new boards can affect all three.

Compare products approved for your framing

Solid and engineered hardwood can both be options over a suitable wood subfloor. The installer should identify the subfloor material, its condition, and the recommended attachment method for each product you choose to compare.

Check the slab before settling on a product

Start with engineered hardwood approved by the manufacturer for the slab and conditions in your room. Ask how the slab will be checked and what the product calls for in moisture protection, adhesive or underlayment, and flatness.

Plan the join where the floors meet

If an addition sits on concrete and the original room has a wood subfloor, compare the finished height on both sides. An approved product may work across both using the required installation methods. Otherwise, plan a clean break at an opening.

Rick Says: Add up the height of the whole floor

If your sample fits under a door, check the floor that will actually go in. The board, any underlayment or adhesive, and subfloor preparation can all change the finished height. Bring a photo of the tightest door, the fireplace hearth, and the floor next to it. I’d check all three before deciding what to order.

A Franklin homeowner who kept part of the floor

Tom Button of Franklin planned to keep the headers dividing his rooms. His crew showed him how lacing in new boards and adjusting the stain could give his retained and new wood a more continuous look. Ask about the original board dimensions and condition if you want to explore that option.

Refinished hickory connecting the kitchen island and dining area in the Hartog residence

McGrath kept and refinished the hickory through the Hartog kitchen and dining area.

Project example: Keep wood that still has life in it

The Hartog home had hickory worth keeping through several rooms. McGrath repaired and refinished it. If you’re adding hardwood in only one part of your Franklin home, have us assess what can stay and what can be refinished. That gives you a clearer comparison before pricing a full replacement.

Warm wide planks of Maine Traditions Rangeley Clear beside a seating area

Solid example: Maine Traditions Rangeley Clear

Maine Traditions offers this live-sawn solid red oak in 5-inch boards. Compare the color and grain across several boards. If you plan to install it over a wood subfloor, ask about the approved installation method and total height.

Dark brown Kährs Oak Russet boards in a bright room with a sofa and windows

Engineered example: Kährs Oak Russet

Oak Russet is a three-layer white oak from the Kährs Canvas Collection. Kährs specifies a 3 mm wood wear layer. Ask which installation and moisture protection the maker allows for your substrate and what the floor needs for future refinishing.

What to confirm before choosing a hardwood

Identify the substrate in each room

Tell us about additions, slab rooms, and crawl spaces. We’ll check what’s under the current floor in the areas you want to connect.

Choose the products to compare

Check which installation methods each manufacturer approves. Compare board thickness, the engineered wear layer, and finish care.

Measure flooring build-up

Look at where the new floor meets existing boards and stone, plus how much clearance is available under doors and appliances.

Ask about the written scope

Compare the included subfloor preparation, moisture checks, installation method, and transition materials for each proposed option.

Questions about new hardwood in Franklin

Can engineered hardwood be refinished?

It depends on the thickness of the top wood layer, the manufacturer’s guidance, and the floor’s condition. Before you order, ask what maintenance and future refinishing are possible for that exact product.

Can the same engineered hardwood go over wood and concrete?

Sometimes. Confirm the product is approved for both substrates and that the specified installation method and moisture protection work in each room. Also confirm where the two finished surfaces meet.

Can I keep hardwood in one room and install new wood next to it?

Often. If you want a continuous look, compare species, board dimensions, and stain. If the existing floor or subfloor makes that difficult, you can use a planned transition at the opening.

Should I replace my existing hardwood or refinish it?

Ask a flooring specialist to check remaining wood thickness, previous sanding, and any movement or moisture damage. If the wood is sound with enough material, refinishing can preserve it while you plan new flooring elsewhere.

Bring a plan of the rooms you want to connect

Bring photos of your current floor at two or three openings and tell us which rooms sit over a slab or crawl space, if you know. We can start comparing hardwood at the Franklin showroom and identify what needs a site visit.

Flooring and cabinetry samples at McGrath Floor & Design’s Franklin showroom