Hardwood Floor Refinishing in Spring Hill, TN
The hardwood that runs from your kitchen into the living room may have years left. We’ll help you see which boards can stay, decide where the finish should stop, and plan the work around a home you still need to use.

Hartog hickory refinishing project in Franklin, TN.
How much work does your floor need?
Start at the most worn spot, then follow the same boards through the next doorway. The right scope depends on the condition of the wood and where a change in color or sheen will be visible.
Refresh sound wood with a maintenance coat
If the finish looks dull and the wear is mostly on the surface, a compatible maintenance coat may restore sheen. Ask the crew to check the existing finish and the cleaners or polishes you’ve used. A maintenance coat follows the color already on the floor.
Sand when the damage reaches the wood
Deep gouges, bare boards, or a new stain color can call for sanding back to bare wood. Have the crew check the wear layer and the condition of the floor before choosing that scope. Ask for a sample on your own boards so you can see how the grain and tone read from room to room.
Decide which boards need repair
For damage around a sink or dishwasher, fix the source of moisture first and have the wood checked. A flooring assessment can identify the boards that need replacement and whether sound wood around them can be sanded. Mark the natural stopping points, such as a threshold or a change in direction.

Hartog entryway after refinishing. McGrath project in Franklin, TN.
How one kitchen repair fit a multiroom refinish
At the Hartog home in Franklin, the kitchen needed selected hickory boards replaced. McGrath then sanded, stained, and finished the wood through the kitchen, pantry, bar, and other living areas. The finished entryway shows how much natural color variation remains from board to board.
If a repair is on your list, take one close-up of the damaged boards and one wide shot that shows where the wood continues.
A Spring Hill customer on working with Julie
Lisa D. of Spring Hill shared what it was like working with Julie at McGrath. “From start to finish it has been the best experience!”
Refinishing feedback from Franklin
Cathy O. of Franklin, TN, said the crew kept her informed with updates and photos during her sanding and refinishing project. She also credited McGrath’s follow-through after the work was complete.
Prepare the rooms before the first coat
Map connected spaces
Walk the kitchen, hall, stairs, and adjoining rooms. Agree on thresholds and which boards or treads need repair.
Choose color and sheen
Compare samples on your floor in daylight and under your usual lamps. Note how trim, cabinets, and adjoining floors look against each sample.
Plan who can use each room
Ask what needs to move, whether appliances are included, and how family members and pets will get through the house while work is underway.
Confirm return-to-use dates
Ask for separate dates for foot traffic, furniture, and rugs based on your finish system and site conditions.
Questions about refinishing in Spring Hill
A doorway, threshold, or change in board direction can make a sensible stopping point. Where boards run continuously between rooms, compare the existing and proposed colors and sheens before deciding how far to go.
Some engineered floors have enough real wood above the core to be sanded. Ask for a wear-layer check and share the product name or a spare board if you have one. Work done during a previous refinish can affect how much wood remains.
Have the moisture source addressed first. Ask the flooring crew to check the affected area and nearby boards before you decide whether to sand, wait, or replace sections.
Ask the crew to prepare a few samples on the same species and sanding profile. Check them beside cabinets and trim at different times of day, and compare the samples with the proposed topcoat.
Compare finish options
Show us where the wear starts
For a Spring Hill refinishing quote, share a wide photo showing where the wood runs, a close-up of the worn or damaged spot, and a list of rooms you want to keep accessible during the work.
