Skip to main content

Luxury Vinyl Plank Installation in Spring Hill, TN

If the kitchen, entry, and living room all need flooring, plan them as one job. McGrath can help you compare LVP samples, check the surface underneath, and decide how the new floor will meet adjoining rooms.

Wood-look vinyl planks continuing from a kitchen island into the dining area

Room scene from LW Flooring.

Wood-look plank samples
Subfloor and transition planning
Installation quote by room

Choose the plank and the installation together

Bring the rooms into the decision. The same floor may need a different preparation plan where it meets concrete, tile, carpet, or stairs.

Choose a surface you’re comfortable maintaining

Compare a few full planks in the finish you like. For a kitchen or entry, check the collection’s care guide, whether it is approved for the room, and how everyday spills should be handled.

Check moisture, flatness, and floor height

An installer should identify the existing surface and compare it with the collection’s flatness and moisture requirements. Compare preparation and any required underlayment or vapor protection in the written quote.

Walk the route between rooms

Decide where plank direction changes and where the floor meets a stair, threshold, or tile. Ask which trim pieces are available in the same collection. Check door and appliance clearance if the finished floor will sit higher.

Compare the complete floor at the doorway

Take the plank, carpet, and approved cushion samples to the doorway. Ask the installer to measure both finished heights from the same reference point, including what’s underneath each floor. Check where the join will sit with the door closed.

Wide wood-look Lakepoint vinyl planks in a living room with a light sectional

Florence Pro in Lakepoint. Room scene courtesy of WFS Wholesale.

A Spring Hill project with vinyl plank and carpet

For a Spring Hill flooring project, McGrath removed areas of glued-down hardwood and carpet, installed WFS Florence Pro in Lakepoint, and installed new carpet in part of the home. If your rooms also use different surfaces, ask where removal stops and how the new floors will meet at the doorway.

Why the product choice matters. Florence Pro is a floating plank with a 1 mm attached pad. WFS lists it at 7.5 mm overall thickness, 9 × 60 inches, and a 20-mil wear layer. Compare its finished height with your tile or carpet before choosing the transition.

A nearby homeowner on matching LVP

Jeannie W. of Thompson’s Station said McGrath installed upstairs LVP to match her existing downstairs floor. If you’re trying to match a plank, bring a spare board or its product label so we can compare the profile before measuring.

How we plan an LVP installation

Map the rooms

Tell us which rooms connect and which existing materials you want to keep.

Compare samples

Check plank tone, texture, approved uses, and trim pieces.

Inspect the surface

Plan removal, floor preparation, and any moisture checks the collection calls for.

Review the quote

Confirm the material, transitions, and installation scope before scheduling.

Questions before you start

Can LVP go over an existing floor?

Sometimes. The manufacturer needs to approve the existing surface and the installer needs to check its stability, flatness, and moisture conditions. Added height can change how doors, appliances, and transitions fit.

Does a thicker wear layer tell me which floor to choose?

It is one part of the comparison. Also look at finish, texture, locking system, approved use, and the terms of the warranty. Ask to see the warranty for the exact collection.

What does waterproof mean when the floor is installed?

Check the product’s instructions and coverage for surface spills. A plumbing leak, flooding, or moisture from a slab calls for a separate assessment of what is under and around the planks.

Tell us which rooms you want to connect

Send rough room sizes, photos of the existing flooring, and any stairs or adjoining rooms you need the new planks to meet.

Flooring and cabinetry samples at McGrath Floor & Design’s Franklin showroom