Skip to main content

Hardwood Flooring Installation in Belle Meade, TN

Your front door, fireplace, and room openings all affect how new hardwood will look. McGrath helps Belle Meade homeowners choose the board width and direction, decide where a pattern belongs, and plan how new wood meets existing trim and stone.

Oak herringbone floor beneath a bed beside corner windows in the Modern Abode remodel

Perla Gris herringbone in a McGrath and Modern Abode remodel showcase.

Lay out the view from the front door
Compare scale with full boards
Plan where a pattern stops

Decide where the pattern belongs

Walk from the entry toward the rooms you use most. Pick out the view you want the floor to draw your eye toward and the point where a change of pattern would feel natural.

Use long boards to carry a view

If the entry opens toward a living room or a long hallway, a straight layout can carry that view through the rooms. Ask whether the proposed direction works with the subfloor and fastening method. If you want a different direction, discuss what preparation that would add.

Set the pattern around a focal point

For a herringbone foyer, choose what to center it on. A front door, a room opening, or the center of the room may give different starting lines. Ask to see the pattern at the wall, where the layout determines the size of the cut pieces.

Use the opening to end one layout and begin another

A doorway, cased opening, or stone threshold can frame a change from herringbone to straight boards. Talk through whether a border will look clean beside the casing and how it meets any existing floor that will stay.

Rick Says: Look at the pieces along the wall

A herringbone sample tells you the color. It takes a few rows to see what the pattern does at your front door. Before anyone makes the first cut, ask to see the centerline and the pieces that land near the walls and hearth. If one side has skinny cuts, there may be a better way to set out the room.

Same finish family, different layouts

D&M’s Artisan Home Perla Gris comes as a 5-by-24-inch herringbone piece and a 6-inch straight plank in random lengths up to 75 inches. Both are wire-brushed, character-grade European oak. Compare several boards from each before deciding how the patterns meet. Natural boards vary in color and grain.

Oak herringbone leading across a dining area toward dark-framed glass doors

The repeating oak pattern is easiest to see across open floor between the table and windows.

Project example: A pattern across adjoining spaces

Modern Abode’s Jack Urbaldo selected D&M Perla Gris herringbone with McGrath for a remodel. The photos show how the zigzag looks in a bedroom and in an open area with larger windows. When you compare a pattern at the showroom, use those two views to think about how much of the floor your own furniture will leave visible.

What the layout plan should show

List what you’re keeping

Photograph casing, hearths, floor registers, and thresholds that will stay. Note where you want the new boards to meet each one.

Choose a view to center

Tell us whether the front door, fireplace, or hall opening should guide the layout. Bring a sketch with the openings marked.

Compare boards on the floor

Lay out enough boards to see grain and repeat. Check samples beside your trim and in both sun and shade.

Confirm boundaries and materials

Confirm which rooms use each pattern, what ends the pattern, and the material allowance for the agreed plan.

Hardwood layout questions for Belle Meade homes

Does herringbone need to go throughout the house?

You can reserve it for an entry, study, or dining room and use straight planks elsewhere. A cased opening or border helps define where the pattern changes.

Can you design new flooring around existing trim?

Often. We check the casing, baseboards, and finished floor heights first. If the trim can stay, ask where the new floor will fit under it and where a new molding will show.

Can I run straight hardwood lengthwise down the hall?

It depends on what’s beneath the floor and the installation method. Ask how the preferred direction works in the hall and across connected rooms before you select a material.

Will herringbone change my quote?

It can. The room geometry, borders, alignment, pattern cuts, and amount of extra material can change the price. Ask which parts of the scope are specific to the pattern.

Bring a photo from the front door

Bring that photo and a rough floor plan to the Franklin showroom. We’ll compare board layouts and help you decide which openings and existing finishes to measure in your Belle Meade home.

Flooring and cabinetry samples at McGrath Floor & Design’s Franklin showroom