Skip to main content

Hardwood Flooring and Stair Updates in Green Hills, Nashville

If you’re putting in hardwood in Green Hills, decide what should happen at the staircase before you order the flooring. McGrath can help you plan how the wood meets the landing, whether to keep or update the treads, and where a runner makes sense for your household.

Hickory stair treads and landing beside painted risers and dark balusters

McGrath’s Hartog refinishing project in Franklin shows what a continuous finish can do for stairs and landings.

Decide what stays on the stairs
Check the top and bottom steps
See stains beside the railing

Choose what happens at the staircase

A staircase can look like part of the same design even when it needs different materials from the floor. Look at the treads you step on, the vertical risers between them, and the front edge of the top landing.

Refinish the treads if the existing wood is sound

If there’s usable wood under a runner or an older finish, your plan may call for refinishing the treads and selecting a compatible floor nearby. Ask to see stain samples on both woods. Species, age, and grain can affect how the same stain reads.

Plan the treads and landing edge together

When you want new treads or a new landing edge, ask which stair parts are available for the floor you like. Straight stairs, angled treads, and open sides call for different details. The way the new floor meets the top and bottom steps should be part of the site measure.

Show the wood you want to see beside the runner

A runner lets you keep wood visible at the sides and adds some softness underfoot. Measure at the narrowest part of the flight and consider turns and landings. If you keep an existing runner, ask us to look for old fastener marks and finish differences once it’s lifted.

Rick Says: Start at the last step

Stand on the top landing and look at the leading edge of that step. Ask to see the stair nose beside your flooring sample. Then have your installer show you how high the top and bottom steps will be once the new wood is in. I’d settle those details before ordering.

A Nashville customer who used wood and carpet

Eric Peterson of Nashville worked with Laura on both wood flooring and carpet. When an issue came up on the carpet side, he said she helped him reach a fair resolution. If your plan combines wood and carpet, bring photos of both and show us where they meet.

Warm hickory floor extending from an open entry into adjacent rooms

An entry view of the Hartog hickory floor in Franklin, TN.

Project example: One finish across the levels

At the Hartog home, McGrath refinished the existing hickory across rooms, stairs, and landings. The dark railing and painted risers still define the staircase, while the hickory carries through the home. For a new installation, begin by deciding whether that continuity or a stronger contrast suits your own staircase.

What to cover in a flooring and stair quote

Identify what stays

Mark the treads, risers, trim, railing, and runner you want to keep. Photograph an exposed side of the staircase if there is one.

Measure the finished heights

Include the top and bottom landings. Ask how the new floor and any tread changes affect the first and last steps.

Approve the edge and finish

Look at a stair nose or tread sample beside the floor. Compare both against the riser and railing finish in your light.

Plan access upstairs

Ask when the stairs will be out of use and when each floor or tread finish can take foot traffic.

Questions about hardwood and stairs in Green Hills

Can I install a new floor and keep my existing staircase?

Often, yes. We’ll look at tread condition, species, and the landing edge first. Depending on the materials, a compatible stain, separate tread work, or a defined transition could be the better fit.

Do the treads need to match the landing exactly?

Choose whether you want a close match or a deliberate contrast. A sample laid next to your railing and trim helps you see the difference before you commit.

Can I leave the risers painted when the treads are wood?

Yes. Painted risers can stay if they’re in good shape and the new tread and landing details fit. Ask whether patching, trim repairs, or painting is part of the scope.

Can the staircase be used during the work?

Access depends on the installation sequence and cure requirements. If the stairs are the only route to bedrooms, tell us early so you can plan the work and temporary access.

Show us both landings

Bring a photo looking up the staircase, one from the top landing, and one of the floor on each level. Tell us what you want to keep. We’ll use those details to start your Green Hills flooring and stair quote.

Flooring and cabinetry samples at McGrath Floor & Design’s Franklin showroom