Skip to main content

Luxury Vinyl Plank Installation in Brentwood, TN

Wondering whether to remove the tile before putting LVP in your Brentwood kitchen? Start with the floor’s condition, the height at the doorways, and whether the dishwasher will still slide out. McGrath can walk through both scopes before you commit.

COREtec Newton Oak wood-look vinyl flooring in a light living room with a green sofa

COREtec Newton Oak manufacturer room scene. Ask about current samples and comparable planks.

Compare removal and overlay scopes
Measure appliance and door clearances
Plan the join to the floors you’re keeping

Keep the old floor or take it out?

Compare the finished height and the work needed for each route. A floor that looks fine from above may still have loose material or uneven spots that affect the new installation.

See whether an overlay is actually permitted

Some products allow installation over particular hard surfaces if they are stable, flat, and properly prepared. Check grout joints, hollow tiles, movement, and the new floor height. Ask the installer to confirm the exact product allows that surface.

Consider what removal lets you see and fix

Removal exposes the substrate so the installer can see what needs repair and helps preserve clearance where floors and appliance openings are tight. Allow for disposal, possible extra prep, and protecting adjacent finishes during removal.

Check the kitchen before estimating the height

Measure how much floor height can be added at the dishwasher, range, and fridge. If cabinets or an island are staying or being replaced, agree where the new floor stops and check the product’s rules about fixed fixtures and floating floors.

Use the installation guide to choose an approach

Ask for the guide for the plank you’re considering. Flooring thickness alone won’t tell you whether the surface below is suitable or how the edges need to be finished.

Compare the existing tile with MSI’s requirements

MSI’s guide covers how tile adhesion and grout joints factor into a luxury vinyl overlay. Treat those as points to inspect before choosing your approach, then check the exact plank’s instructions for allowed substrates and surface preparation.

Rick Says: Measure the dishwasher opening

Before you put a new floor over the old one, check the narrowest point between the finished floor and the counter. You want enough room to pull the dishwasher out for service. Check the fridge and the doors at the same time.

A Brentwood homeowner on flooring and cabinet coordination

Nicole Aziminia of Brentwood said her McGrath team coordinated removal and installation of wide-plank flooring across the downstairs alongside her cabinet renovation.

What a removal-versus-overlay quote should spell out

Which surfaces stay

List what’s in each room now and where the work stops.

What will be prepared

Confirm how the installer will check the old surface and which repairs or smoothing are included.

How the edges work

Check finished floor heights at doors, kitchen appliances, and adjoining wood or tile.

Who handles removal

Confirm old flooring disposal, appliance moves, and baseboards or shoe molding.

Brentwood LVP questions about existing tile and cabinets

Can you install LVP over my existing tile?

Sometimes. Review the product’s allowed substrates and have the tile checked. Loose tiles, an uneven floor, or limited clearance at an adjoining room may make removal a better starting point.

Does a floating floor run underneath a kitchen island?

Check the installation rules for the exact floor and whether the island is fixed. Have your cabinet and flooring installers agree on the sequence and expansion details before work begins.

What can change after the old floor is removed?

The installer may uncover uneven patches, loose underlayment, or repairs that weren’t visible. Ask the quote to explain how added preparation is measured and approved.

Get a quote that spells out what stays and what goes

Send a few photos of the current floor, appliance openings, and adjacent rooms. Let us know if you plan to keep the cabinets or change the layout so we can talk through both installation scopes.

Flooring and cabinetry samples at McGrath Floor & Design’s Franklin showroom