Hardwood Flooring Installation in Nashville, TN
Replacing carpet with hardwood can change the level at doors, the look of the stairs, and what needs work underneath. McGrath helps Nashville homeowners settle those details and plan the rooms you’ll need to use while the work is underway.

Hickory entry and adjoining rooms from McGrath’s Hartog project in Franklin, TN.
Start where the carpet comes up
If you plan to live at home during the work, walk each room with your installer. Point out the doors and stairs you use every day and the flooring you want to keep.
Identify the surface before choosing an installation method
At an accessible edge, ask what the carpet covers. After removal, have the crew check the subfloor for movement, damage, flatness, and moisture against the requirements for your selected hardwood and installation method. If there’s an existing wood floor worth saving, ask about refinishing.
Confirm finished heights and the stair profile
Ask the installer to compare the planned hardwood height with the floors you’re keeping. Include any approved underlayment or preparation layers. Check whether each door will clear, what transition it needs, and which stair nosing profile fits the treads and landing.
Set a route and a schedule for the rooms you need
Decide where furniture will go, how to reach bedrooms or the kitchen, and when you’ll be able to use the finished floor. If you’re choosing between factory-finished wood and a finish applied on site, ask what each would mean for access and cure time.
Rick Says: Ask what the carpet is hiding
Before you order the wood, ask what happens when the carpet comes up. Does your quote include pulling the tack strips and checking for loose or uneven spots? If the installer finds a damaged panel, ask who will show you the repair and what you’ll get to approve before the work starts.
A Nashville homeowner on switching to hardwood
Charles I. replaced carpet in his living and dining rooms with hardwood. He credited Rick with helping him choose the flooring and praised the installation crew’s workmanship.

Product example: Urbanfloor Birch Betula.
A product sample to check at the doorway
Urbanfloor’s Birch Betula is a 5-inch engineered birch plank with a listed thickness of 9/16 inch. The assembly at the doorway can also include a layer beneath the plank, depending on how it’s installed. Ask your installer to show you the planned build-up beside the floor you’re keeping before you order the transition trim.
Put the scope in writing
Walk the rooms
Mark what comes out, what stays, and which paths you’ll need during installation.
Check the subfloor
Discuss what can be checked before removal and how the crew will document any repairs it discovers.
Choose the transitions
Confirm the planned heights, door clearances, stair profiles, and trim with your selected hardwood.
Agree on access
Set the order of work, furniture moves, dust protection, and when you can use each room again.
Questions about replacing carpet with hardwood
Have it inspected before committing to new flooring. Ask whether the boards are in good enough condition for a repair or refinish and how that option would affect floor height at adjoining rooms.
It depends on the height of the existing surfaces and the layers needed for the new installation. Ask for the estimated finished height at each doorway, then confirm it once the old floor is out.
Stairs need their own details. Ask how the treads, risers, and nosing will be finished and whether the new landing height changes the top step. Confirm that the stair work is in the quote.
Look for carpet and pad removal, disposal, trim, and transitions. Ask which preparation is included and how any additional work will be documented, priced, and approved.
Show us where the carpet ends
Bring a sketch or pictures of the carpeted rooms, adjoining floors, and stairs. Tell us which rooms need to stay open. We’ll help you plan what to inspect and what to include in the installation scope.
